Winrock

aloi 400 uns n04400 en 2.4360 monel 400 screw

Rumah »  Produk »  Pengikat aloi nikel »  aloi 400 uns n04400 en 2.4360 monel 400 screw

No.61-Alloy 400 UNS N04400 EN 2.4360 Monel 400 screw

Spesifikasi


Alloy 400 UNS N04400 EN 2.4360 Monel 400 screw

1. Prompt & Professional Response.

2. Harga Kompetitif & Kredibel.

3. penghantaran berkualiti & cepat.

4. Perkhidmatan Disesuaikan - (Dihasilkan mengikut lukisan pelanggan atau sampel).

Rekod pesanan separa produk berkaitan untuk rujukan anda

Monel 400 fastener screw Exported to United Arab Emirates.

NO.DESCRIPTIONQTYStandard
1

Monel 400 hex cap screw 3/4”-UNCx120mm

300PCSASME B18.2.1

Monel 400 hexagon head bolts c/w nuts Exported to Kerea

NO.DESCRIPTIONQTY
1 Monel 400 hexagon head bolts c/w nuts DIN933/934, M12x451500set

Pengenalan ringkas bahan tersebut

Alloy 400 UNS N04400 EN 2.4360 Monel 400

A. Alloy 400 UNS N04400 EN 2.4360 Monel 400 Overview

Monel 400 is a nickel-copper alloy (about 67% Ni –23% Cu) that is resistant to sea water and steam at high

temperatures as well as to salt and caustic solutions. Characteristics:

1) Resistant to seawater and steam at high temperatures

2) Excellent resistance to rapidly flowing brackish water or seawater

3) Excellent resistance to stress corrosion cracking in most freshwaters

4) Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated

5) Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations, but

is seldom the material of choice for these acids

6) Excellent resistance to neutral and alkaline salt

7) Resistance to chloride induced stress corrosion cracking

8) Good mechanical properties from sub-zero temperatures up to 1020° F

9) High resistance to alkalis

Aplikasi:

1) Marine engineering

2) Chemical and hydrocarbon processing equipment

3) Gasoline and freshwater tanks

4) Crude petroleum stills

5) De-aerating heaters

6) Boiler feed water heaters and other heat exchangers

7) Valves, pumps, shafts, fittings, and fasteners

8) Industrial heat exchangers

9) Chlorinated solvents

10) Crude oil distillation towers

B. Komposisi Kimia,%

CMnSSiNiCuFe
.30 max2.00 max.024 max.50 max63.0 min28.0-34.02.50 max

C. Hartanah Mekanikal

Suhu bilik tipikal Ciri-ciri tegangan Bahan Annealed

Borang ProdukKeadaanTarik (ksi).2% Hasil (ksi)Pemanjangan (%)Kekerasan

(HRB)

Rod & Bar

Annealed75-9025-5060-3560-80
Rod & BarDingin sejuk

Stress Relieved

84-12055-10040-2285-20 HRC
PlateAnnealed70-8528-5050-3560-76
LembaranAnnealed70-8530-4545-3565-80
Tube & Pipe

Seamless

Annealed70-8525-4550-3575 max *

D.Available Forms of Alloy 400 UNS N04400 EN 2.4360 Monel 400

Plate & sheet, bar, pipe & tube, flanges, fittings( elbow, reducer, tee, cross, bend and pipe cap) and wire.

ASTM Specifications

Paip

Smls

Paip

Welded

Tube

Smls

Tube

Welded

Lembaran

/Plate

BarTempahanPemasanganWire
B165B725B163B127B164B564B366

Other Available Materials:

Nikel Alloy Steel

Nickel 200/201, UNS N02200/N02201, EN 2.4066/2.4068;

Monel 400/K500, UNS N04400/N05500, EN 2.4360/2.4375;

Inconel 600/601/625, UNS N06600/N06601/N06625, EN 2.4816/2.4851/2.4856;

Incoloy 800/800H/800HT/825, UNS N08800/N08810/N08811, EN 1.4876/1.4958/1.4959;

Hastelloy C-276/C-22, UNS N10276/N06022, EN 2.4819/2.4602;

Alloy 20/Carpenter 20Cb3/UNS N08020/EN 2.4660; AL-6XN/UNS N08367;

Duplex Steel

UNS S31803/ S32205/ SAF 2205/ EN 1.4462/ A182 F51;

UNS S32750/ S32207/ SAF 2207/ EN 1.4410/ A182 F53;

UNS S31254/ 254SMO/ EN 1.4547/ A182 F44;

UNS N08904/ 904L/ EN 1.4539/ A182 F904L;

UNS S32760/ A182 F55; UNS S31050/ EN 1.4466; 17-4PH/ UNS S17400/ EN 1.4548;
Keluli tahan karat

AISI 347, 347H, 316Ti, 321, 316, 316L, 304L


 

, , , ,