inconel 625 pengikat dalam nikel

625 inconel fasteners in nickel

In what form is nickel alloy Inconel 625 available at SOONV?

Lembaran
Plate
Bar/rods
Pipe & Tube (welded & seamless)
Wire/ring
screws/bolts
valves/seats

Apakah ciri-ciri Inconel 625?

Kekuatan serapan rasuk yang tinggi
Pengoksidaan tahan 1800 ° F
Air laut berpelukan dan tahan kakisan tahan kakisan
Tekanan kekebalan ion kekebalan ke klorida retak kakisan
Bukan magnetik

Dalam apa aplikasi yang digunakan Inconel 625?

Sistem pengangkut pesawat
Aeroangkasa
Sistem ekzos enjin jet
Sistem tujahan-pembalik mesin
Peralatan air laut khusus
Peralatan proses kimia

Fabrication with Inconel 625

Alloy 625 has excellent forming and welding characteristics. It may be forged or hot worked providing temperature is maintained in the range of about 1800-2150° F. Ideally, to control grain size, finish hot working operations should be performed at the lower end of the temperature range. Because of its good ductility, alloy 625 is also readily formed by cold working. However, the alloy does work-harden rapidly so intermediate annealing treatments may be needed for complex component forming operations. In order to restore the best balance of properties, all hot or cold worked parts should be annealed and rapidly cooled. This nickel alloy can be welded by both manual and automatic welding methods, including gas tungsten arc, gas metal arc, electron beam and resistance welding. It exhibits good restraint welding characteristics.